BNVTJ - 484, INTERLUX MICRON CSC SHARK WHITE
- MSDS: BNVTJ
- Manufacturer: INTERNATIONAL PAINT CO INC
- Product Name: 484, INTERLUX MICRON CSC SHARK WHITE
- National Stock Number: 8010-00N033877
Product Identification
Product ID:484, INTERLUX MICRON CSC SHARK WHITE
MSDS Date:04/01/1992
FSC:8010
NIIN:00N033877
MSDS Number: BNVTJ
Responsible Party
HOUSTON, TX 77210-4806
US
Emergency Phone: 201-686-1300
Info Phone: 201-686-1300
Cage: 69827
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 69827
Ingredients
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 5-10%
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
4 @ 20C.
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
10 @ 20C.
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 15-20%
OSHA PEL 100 PPM;150 PPM STEL
ACGIH TLV: 100 PPM;150 PPM STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
COPPER (I) OXIDE; (CUPROUS OXIDE)
CAS: 1317-39-1
RTECS: GL8050000
Fraction By Weight: 35-40%
OSHA PEL 1 MG/M3 (MFR)
ACGIH TLV: 1 MG/M3 (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:SEVERE IRRIT, REDNESS,
TEARING & BLURRED VISION. SKIN:IRRITATING, MAY RESULT IN
DERMATITIS. HARMFUL IF ABSORBED THRU SKIN. INHAL:SEVERE IRRIT,
DIZZ, POSSIBLE NAUSEA & VOMIT & UNCON. INHAL O F ZINC FUMES MAY
PRODUCE SYMPTOMS KNOWNAS METAL FUME FEVER. SYMPTOMS USUALLY
DISAPPEAR W/IN 24 HRS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INGEST:GI IRRIT, NAUSEA, VOMIT,
DIARRHEA & UNCON. CHRONIC:OVEREXPOSURE TO & MISUSE OF SOLVENTS HAS
BEEN LINKED TO PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN & RESPIRATORY CONDITIONS.
First Aid
First Aid:EYES:FLUSH IMMED W/COPIOUS QTYS OF WATER FOR AT LST 15 MINS,
GET MD IMMED. SKIN:REMOVE CONTAM CLTHG, WASH SKIN W/PLENTY OF SOAP
& WATER. LAUNDER CLOTHES BEFORE REUSE. INHAL:REMOVE TO FRESH AIR.
GIVE A RTF RESP IF NEEDED. GET MD. INGEST:GET MD IMMED. DRINK
PROMPTLY MILK, EGG WHITES, GELATIN SOLN OR WATER. AVOID ALCOHOL.
Fire Fighting
Flash Point Method:COC
Flash Point:83.0F,28.3C
Lower Limits:1%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA. H*2O MAY BE USED TO
COOL UNOPENED CNTNRS, BUT MUST NOT(SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP W/ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STORAGE OF FLAMMABLE LIQUIDS. OSHA CLASS IC.
Other Precautions:AVOID BRTHG DUST/CHIPS FROM SANDING/BLASTING SURFS
COATED W/PROD. THIS MATL IS TOX TO FISH IF MISUSED. READ CNTNR LBL
BEFORE USE. RECOM GROUNDING & BONDING OF CNTNRS WHEN TRANSFERRING
LIQS & PWDRS TO AVOID STATIC CHARGE BUILD UP.
Exposure Controls
Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF
OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPRVD RESP I/A/W 29 CFR 1910.134 TO (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGS BELOW LIMITS SPECIFIED & TO REMOVE (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE & WASH SOILED CLTHG BEFORE REUSE, WASH
HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:BE USED AS AN EXTINGUISHING AGENT. RESP PROT:REMOVE A
COMBINATION OF PARTICULATES & VAPORS. VENT:DECOMPOSITION PRODUCTS
DURING WELDING OR FLAME CUTTING ON SURFACES COATED W/THIS PRODUC T.
Chemical Properties
Boiling Pt:B.P. Text:>244F,>118C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.98
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:23
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP DRY. STORE AWAY FROM DIRECT HEAT,
FLAME OR SPARK.
Hazardous Decomposition Products:CO, CO*2, VARIOUS HYDROCARBON
FRAGMENTS, ZINC FUMES, COPPER FUMES.
Disposal
Waste Disposal Methods:DISPOSE I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.